Like Microsoft Excel, you can create chart from data table in Numbers. If you create chart from a simple table you wouldn’t get any problem with that. But if you create it with more complex table structure you will get a little bit problems. But I want to start it with simple one.

1. Open Numbers application, because I put its alias in my Dock, so then I click it there.
   
2. Template chooser dialog will show up as your first screen, choose Blank, click Choose button.
   
3. Create a table like table in picture below (or you can create your owns)
   
4. For first way you can click the chart icon in the toolbar directly, and I choose the Columns chart type.
   
5. You will get a chart like picture below and I am ensuring that you don’t want the chart result.
   
6. So you must set its source data in table so as the result which you want, to change its data, just click the cart and cell that containing chart’s source data will highlighted automatically then click small circle that located on right bottom cell then hold and drag until it adjusted.
   
7. And you can look the result.
   
8. Second way is block the source cell first with click, hold and drag it until all data covered.
   
9. And click chart icon in the toolbar.
10. You’ll get the chart directly, and if you want reverse the axis data just click the option icon like shown in picture below
    
    and you’ll get the result like this picture.
    
11. The problem is how to create chart that the source data is nonadjacent cells like picture below.
    
    To create it, press Command key then click, hold and drag first column then repeat it to second column and repeated it until all data has blocked (don’t forget to block the header too).
    
12. Click Chart icon in the toolbar.
    
13. You’ll get your chart.
    

note :

1. You may to create your own chart size by press Option key when you click Chart icon in the toolbar.
2. Use Shift key if you block the cell with keyboard.

(article no: 0094)

This trick tried with Firefox version 2 but I think this trick will run on version 3 too.
OK, follow these steps:

1. Firefox has a great bookmark toolbar that make us can bookmark easier.
   
2. Firefox give many way to bookmark a website with bookmark toolbar, first way is right click on bookmark toolbar and choose New Bookmark menu.
   
3. Just fill the textbox on the dialog form, if you check the Load this Bookmark in the sidebar you’ll website will display in the Firefox sidebar
   
   so I suggest you don’t necessary to check that value and if you finished click OK button (figure-3).
4. You’ll get the new toolbar button.
   
5. You also add a separator to make you more comfort to explore your toolbar bookmark with right click on toolbar and choose New Separator menu
   
6. And you’ll get result.
   
7. I suggest you make some folder to organize you bookmark. To make a folder just right click on the toolbar and then choose New Folder menu.
   
8. Fill the folder name and its description if you like and then click OK button.
   
   And you’ll get the result like picture below.
   
9. Second way, you can use the drag and drop method, just click and hold a hyperlink to toolbar or folder, this is a easiest solution to bookmark your link!
   
10. If you drop it to toolbar you can see the result is like picture below
    
    And if you drop it to a folder in the toolbar you’ll get the result like picture below.
    
11. Have a nice bookmark

Note: I tried this trick with Firefox 2 Mac version but you can try this trick to Windows version too with exactly same steps(picture below this show the Firefox bookmark toolbar, that’s the same appearance, isn’t it?).

(article no:0069)

Make sure you have installed Parallels Desktop application on your Mac to following this tutorial.

1. Open Parallels Desktop and then click File -> New menu. If you’re currently run an operating system with Parallels Desktop, stop it first.
   
2. Choose first option, Windows Express and then click Next button.
   
3. Choose Windows Vista option, click Next button.
   
4. Enter your Windows Vista serial number/product number where usually written on CD case.
   
5. Giving it represents name, I suggest leaving it with name Microsoft Windows Vista, and making sure Enable file sharing is checked.
   
6. Choose first option, Virtual Machine in next step and the click Next button.
   
7. If you’re installing Windows Vista with an original CD, choose Real CD/DVD option and then click Finish button.
   
8. Parallels Desktop is starting virtual computer.
   
9. And Windows Vista installation progress is begun.
   
10. Re-enter your product key, if the Vista installation is asked and then click Next button.
    
11. Windows Vista installation will begin to copy its installation files.
    
12. Choose your Windows Vista edition which you bought.
    
13. If Windows Vista installation wizard is begin to install drivers, just click Install this driver software anyway option.
    
14. After all of drivers have been installed, installation wizard is finished. And you’ll bring to your new Windows Vista screen.
    

You can read this article to optimize your virtual machine.

(Article no: 0115)

1. Insert your black CD/DVD.
2. If Mac OS X has detected your blank CD, you’ll ask the action will you take, leave the action is Open Finder and then click OK.
   
3. Your CD/DVD icon will appear on your Finder sidebar.
   
4. Select your files which your want to burn to CD/DVD.
   
5. Click and drag them to CD/DVD icon on sidebar.
   
6. To check your files which will burn, click the CD/DVD icon on sidebar.
   
7. If you are already to burn your CD, right click the CD/DVD icon on sidebar and then choose Burn Disc menu.
   
8. Give the disc name, then choose your burn speed (lower speed will give you a better compatibility).
   
9. And then click Burn button.
   
10. Then Mac OS X will start the burning progress.
    
11. If the burning progress is completed, try to check your burned CD/DVD, are all of files were burn perfect.
    

(Article no: 0086)

This time, I want to share a tutorial to organize your emails using Email Mac OS X built-in application. This application is powerful email client application for me. In my experiment, it can filter tons spam and junk email with training it even for just once.

All right, I consider you join into Visual Basic programming mailing list and you want to group that mailing list into one mail box.
1. Open Mail application by click it on launcher bar.

2. Create a new mail box first by click Mailbox -> New Mailbox menu.

3. Give it name which represents the mailing list name such as Visual Basic Mailing List.

4. If it is success, you can see it on left sidebar.

5. In your Inbox, select an example message. This message will extract its information which will need in filter settings later. So, in my case I click a message which came from Visual Basic Mailing list.

6. Then click Mail -> Preferences menu.

7. Click Rules tab, and then click Add Rule button.

8. Enter you own rule name in Description box. Make sure, you give it a represents name. Choose any value on If any of the following conditions are met combo box. Choose To and Contains value in next combo box and it will enter the mailing list address automatically (It takes value from your selected message). In those both combo boxes you can customize the value, just look your needs. In next combo box, choose Move Message value and choose your mail box name (in my case I chose Visual Basic Mailing List value) in to mailbox combo box. You can also adjust its value as your need. And click OK button when you’ve done.

9. Click Yes button when you are confirming to apply the new rule.

10. And my messages which came from the Visual Basic mailing list will move into Visual Basic Mailing List mailbox automatically.

Now, your emails are more organize.
(article no:0111)

I will keep updating this list if I get a new list.

(article no:0101)

This the way to activate it:

1. Open your Finder and then pointing to Macintosh HD > System > Library > CoreServices > Menu Extras folder.
   
2. Find eject.menu file, then double click it.
   
3. And Eject menulet will added onto menu bar automatically.
   
4. To eject DVD/CD just click its icon on menu bar and choose your inserted DVD title.
   

(article no:0046)

2. Locate the video which you will download. You can search them first. Usually, I was using the search box. To use it, type the video keyword. For example, I want to find anything that linked to iMac word, so I type “imac” (without double quote) in box then press Enter.

3. After Youtube finds the video which related to your keyword, you can see them in result page, choose one in result list by click its link.

4. When the video has displayed,

open Safari’s Activity window by click Window – Activity menu.

5. In Activity window, find item which contains a word get_video and usually has biggest file size (To determine file size you can find it at Status field) and then double click that item.

6. Then Safari will download that file automatically, and you can see the download status in Downloads window that open automatically too.

7. After the file has downloaded, you’ll get a file that named: get_video and by default, Safari put it at Desktop.

8. Rename that file with your own name but give it .flv extension

click Add button when you asked.

then you’ll get a result file with .flv extension (In my case, I give it name: imac.flv)

9. Double click it to open the video.

Make sure that you’ve had installed FLV Player. I use this VLC Player to play FLV file on my Mac. I never try this on Safari for Windows but I think you can run on it too.
(article no:0122)

2. To open Configuration Editor window, you can click on items in Configuration section (if you’re looking my picture below, click area is inside red rectangle) or go to Edit – Virtual Machine menu.

3. In Configurations Editor, click Resource: Options, click Advanced tab and then make sure Acceleration level set to High and Enable Intel VT-x support is checked.

4. Next, click Resource: Shared Applications. I suggest you disable Share Windows application to Mac and Share Mac applications to Windows with uncheck their checkboxes. Although they are great features, but if you enable them, Parallels Desktop will create many shortcuts and actually you will use shortcuts rarely or even you’ll never use them.

5. Next, click Resource: Shared Profile. The decision is in your hands. But I was choosing to disable it, because it will make you confuse and make your Windows be slower. And in my experience, I got some errors with it.

6. In fact, Parallels Desktop support 3D application ran on its virtual machine but it optimized for Mac products which have dedicated 3D card such as Macbook Pro and iMac. But you can optimize the configurations so that Parallels Desktop permits its virtual machine support Direct X. To enable the option, click Resource: Video and check Enable DirectX support checkbox so as you can run Direct X applications.

7. To configure memory amount of virtual machine, click Resource: Memory. If you run Windows XP on it set memory to 384 MB and Vista to 512 MB. This setting is important because if you configure the amount too large, you Mac OS X will run very slowly. In my experiment, I’ve set Video Memory to 16MB if I ran Windows XP and 32MB to Windows Vista.

8. In Resource: Floppy, sure I disable the Floppy because I don’t see its benefit.

9. In Resource: Hard Disk, you can find an important button here. Parallels Desktop has two mode of its Virtual Hard Disk. Expanding Hard disk and Plan Hard disk. In Expanding hard disk your virtual hard disk has flexible size as your Windows XP/Vista needs. Contrary with Expanding hard disk, Plain hard drive has consistent of file size. And Parallels Desktop set to Expanding mode by default. Unfortunately, sometimes Expanding hard disk has larger file size than the actual used. So, if you feel your virtual hard disk file size is too big, go to Resource: Hard Disk, click Advanced tab and click Compact button to reduce your virtual hard disk file.

10. In Resource: USB Controller, I suggest you choose Ask me what to do option. So, every time you plug your USB device, you’ll ask by system. Mac OS X or Parallels Desktop virtual machine that will use it.

OK, we’ve discussed Parallels Desktop configurations which must get attention. And don’t forget Parallels Desktop also install its tools which calls Parallels Tools Center in its virtual machine. For example, on Windows Vista you can open it by double click its icon in systray or you can open it through Start – All Programs – Parallels Tools menu.

You can compact your hard disk in this tool/Parallels Tools Center. Click Tool: Disk Compacting, check Execute all stages at once then click Start button and it will takes 30-90 minutes. And you can find the others Tool inside it.

(article no:0116)

2. After it has downloaded, double click downloaded file Proxi_v1.4.dmg (file name may vary) and then after dmg file has opened double click Proxi.pkg icon.

3. After installation process has done, open Proxi program (By default, the location in your Application folder).

4. In Proxi window click iTunes Monitor (you can find it at Component section) and click then drag it to Triggers section.

5. If Proxi window don’t show up click Proxi’s Window menu then click Proxi Editor menu.

6. Click iTunes Monitor in Triggers section and then check Trigger when track changes value.

7. Then click Task button and click Insert Task – AppleScript menu.

8. Click AppleScript in Tasks section then choose Run custom AppleScript option (or if you’ve create the file you may choose Run as existing AppleScript option then browse to your Script file), and type this script below.

set messageText to ""
set SkypeIsRunning to 0
try
    tell application "iTunes"
        set trackName to name of current track
        set trackArtist to artist of current track
        set trackAlbum to album of current track
    end tell
    if not trackArtist = "" then
        set trackArtist to " sing by " & trackArtist
    end if
    if not trackAlbum = "" then
        set trackAlbum to " from album " & trackAlbum
    end if
    set messageText to "Listening > " & trackName & ", " & trackArtist & trackAlbum & " <"
end try

set commandText to "SET PROFILE MOOD_TEXT " & messageText
tell application "System Events"
    set SkypeIsRunning to count (every process whose name is "Skype")
end tell

if SkypeIsRunning > 0 then
    tell application "Skype"
        send command commandText script name "test"
    end tell
end if

9. And remember this trick can apply as long as Proxi software is ran, to make it easy just run it at login with set it from its Preferences, you can access it from Proxi – Preference menu and then check the Start at login option.

10. Close your Proxi window and then open iTunes and try to play a song.

11. If you run it for the first time you will asked to allowing Proxi and AppleScript run for Skype.

12. And your iTunes track information has set as Skype Status.

(source: http://www.johnwilker.com)
note :
On Skype 2.7 or above, they had including this ability. Just open Skype Preferences menu and check Show iTunes song in my mood message in Advanced tab. But with this trick at least you can customize your mood message.

(article no:0095)